Tax incl. Tax excl.

ADA CUBE 360 Line Laser Ultimate Edition

Line laser ADA CUBE 360 is a Line laser equipment that will be appreciated by professional and private users due to its functions. Thanks to the special emitter the instrument projects 360 degrees horizontal beam. It is ideal instrument during construction and repair works when paving tile laying or other coating, wallpapering and so on.

€229.00 Tax incl. €229.00 Tax excl.
1-3 days
check Available

Convenient marking

Line laser projects vertical line and 360° horizontal line. There is no need to rotate the instrument when making horizontal marking. Just place ADA Cube 360 on the selected height. Horizontal beam will be along the perimeter. There is a 90° projection (laser cross) when switching on the vertical line. It is possible to switch off laser lines one-by-one. Just select the line that you need for a work.

Accurate levelling

Auto self-leveling. ADA CUBE 360 differs in high accuracy – the error is just 0,3 mm/m.

Receiver mode

There is a receiver mode for outdoor operation under bright light. The range of the marking increases from 20 to 70m.

Two places of attachment

It is possible to place ADA CUBE 360 on the tripod or attach to the wall mount due to the thread 1/4". One thread is located on the back part of the instrument, another is on the bottom.

TILT operation

It is possible to incline instrument at any angle working in this mode. Just lock the pendulum setting the switch on button in the middle position. Laser beams will be projected with required inclination. This function is used, for example, when setting stair railings.

Protected housing

The whole housing of ADA CUBE 360 is protected from all sides. Rubber parts protect the instrument against damages during falls and hits.

Wall mounting

The metal angle bracket with magnets and 5/8″ thread allows fixing the line laser on any surface. Due to the special notch it is possible to hang the clamp on the drywall screw.

Elevating tripod

Light aluminum support with sliding column for installation at the height from 35 up to 110 cm. The elevating detail is used for smooth adjustment of the height in the range of 25 cm. The tripod provides for quick installation of the level at the required height in any place.

Laser glasses

Required for improving the laser ray visibility, especially when the laser ray is badly visible (e.g. under bright daylight).

Plastic case

Hard plastic case for convenient storage and transportation of the whole set. Everything is at hand.


  • Laser projection: 1H (360°) 1V
  • Working range: 20 m / 70 m (with receiver) 
  • Accuracy: ± 0,3 mm/m
  • Laser diode: class 2, 635 nm, < 1 mWt
  • Dust/water protection: IP 54
  • Power supply: 3 batteries АА / 1.5 V
  • Tripod thread: 1/4"
  • Dimensions: 95х95х65 mm
  • Weight: 0,39 kg

Data sheet

20 m
2 years
Self-Levelling Range
± 4°
Power supply
Laser Beam
Red Beam
Laser Class
Accuracy (mm to 10 meters)
± 3
Dust / Water Protection
Laser Type
Cross Line Lasers

You might also like