ADA CUBE 3-360 GREEN Multi-Line Laser Ultimate Edition
Line laser ADA CUBE 3-360 GREEN is the most compact line laser that builds 3x360° laser planes. Horizontal and vertical beams are projected by 360° due to the special emitter. Three mutually perpendicular laser planes allow you to to easily mark out any type of surface area. Ideal for construction or repair work both for interior and exterior applications.
Bright green beam
Green laser emitter is a main advantage of ADA CUBE 3-360 GREEN. Green beam is ideal for laser marking in bright light. Green laser beam provides the best visibility in comparison with red beam under the same working conditions.
Convenient laser marking
Laser level projects three laser planes: one horizontal and two vertical lines. Scan angle of all lines is 360°. Beam for laser marking is visible in any dot. There is no need to rotate a tool. Just place ADA CUBE 3-360 GREEN at desired height. Intersecting laser beams at a 90° from one another when switching on vertical lines. Very convenient when aligning walls and angles between walls. Laser lines can be turned off one-by-one, leaving only those that are necessary for the operation.
The laser beams automatically self-level. ADA CUBE 3-360 GREEN distinguishes by its high accuracy – the error is just 0,3mm/m.
The ADA Cube 3-360 GREEN can be attached to a wall mount or a tripod with the help of the thread ¼’’. One thread is located on the back side of the tool, another one – on the bottom.
Rubber parts and heavy-duty casing ensure the laser leveler is strong and durable in all conditions. A ribbed surface makes it easy to handle and protects the tool from damages during fall and shocks.
Laser tool operates from the Li-On battery with capacity 2000 mA. Li-On battery allows to increase the operating time.
ADA CUBE 3-360 GREEN can operate from the ordinary batteries, rechargeable batteries and charger. If the Li-On battery power is off or the power of batteries is low, connect the tool to the household electrical outlet via charger and continue working. Li-On battery will be charging. Remove ordinary batteries from the battery compartment when using the charger.
The device features a tilt mode allowing you to work with the laser at any angle you like. Just fix the pendulum, switching a button into the middle position. Laser beams will be projected with the desired slope. Such function is useful, for example, when installing stair railing.
Use detector mode when operating in bright light, outside. Working range increases from 40 to 70 m.
Universal mount ADA BASE
ADA BASE (MAGNETIC LIFT + WALL BRACKET) is an universal mount with micro lift for laser level mounting on any surfaces and height. It consists of two parts: ADA MAGNETIC LIFT (magnetic mount with micro lift for line lasers) and ADA WALL BRACKET (quick-release clamp with capture size up to 55 mm. for line lasers that are set on the MAGNETIC LIFT).
Lightweight folding aluminum tripod with extendable column for setting line laser at a height from 35 to 110 cm. Due to the lifting part it is possible to adjust the height in the range of 25 cm. A tripod allows you to set the line laser at the desired height anywhere.
Professional plastic case
The case is reinforced with stiffening ribs and can easily withstand bumps, drops and various weight loads. Big clip locks are convenient for usage. Line laser and accessories are fixed in the special soft inner structure.
- Laser projection: 1H (360°) 2V(360°)
- Working range: 40 m / 70 m (with detector)
- Accuracy: ± 0,3 mm/m
- Laser: 2 class, 515 nm, < 1 mW
- Dust/water protection: IP 54
- Power supply: 3 batteries АА / 1.5 В, rechargeable batteries, charger
- Tripod thread: 1/4"
- Dimensions: 100×100×85 mm
- Weight: 0,46 kg
- Line laser
- Universal mount ADA BASE
- Telescopic tripod
- Laser target
- Laser glasses
- Li-on battery
- 40 m
- 2 years
- Self-Levelling Range
- ± 4°
- Power supply
- 3 x AA
- Laser Beam
- Green Beam
- Laser Class
- Accuracy (mm to 10 meters)
- ± 3
- Dust / Water Protection
- Laser Type
- Multi-Line Lasers
You might also like